Results 1 to 2 of 2

Thread: Bensen Hang test results

  1. #1

    Bensen Hang test results

    Hello Guys, I need some advice on the set up of a bensen gyro. The hang test results .07 degress mast angle and 90lbs weight front wheel. According to information that I have found mast angle should be 1-3 degrees and minimum weight is 30lbs. I cant find any other setup measurements. Does anyone know what is acceptable?

  2. #2
    You don't need any weights. When your doing a hang test. Put the pilot and fuel on board then do a hang test.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •